Filters

Equipment Condition
Used
Equipment Category

Please choose equipment type to see categories

Manufacturers

Please choose equipment category to see manufacturer

All used equipment listing for sale

(Showing 67 Equipment)

Sort By

Lightly Used Max Pak HCE60FE-8
$48,500.00
Used 2017 Max Pak model HCE60FE-8 horizontal, full eject baler.  Excellent condition, barely used. Was just removed from a distribution center that was relocating. Excellent baler for cardboard,...
Manufacturer
Condition
Excellent Condition (Like New, Never Refurbished)
Manual / Auto Tie
Manual
Cylinder Size
8"
Motor Horsepower
21-30 HP
Feed Opening Length
40" - 60"
Feed Opening Width
43” – 60”
Single or Dual Cylinders (Bore Sizes)
single
VA
611 Moorefield ParkDrive
Suite B,
Richmond,
VA
23236
United States
View on Map
Used Max Pak Closed Door Horizontal Baler
$13,900.00
2003 Used Max Pak HCE3072-48-7 closed door horizontal baler. Has been used to bale clothes. Baler does NOT have a shear knife. Baler is in very good condition and was well taken care of.  Baler h...
Manufacturer
Condition
Good (Running, Needs Minimal Repairs)
Manual / Auto Tie
Manual
Cylinder Size
7"
Motor Horsepower
21-30 HP
Feed Opening Length
39” and Under
Feed Opening Width
43” – 60”
Single or Dual Cylinders (Bore Sizes)
single
VA
611 Moorefield ParkDrive
Suite B,
Richmond,
VA
23236
United States
View on Map
Used Marathon Stealth
$35,000.00
Marathon Stealth baler with EZ-TRAX conveyor. Ready to ship!I also can quote for install
Condition
Great Condition (Little To No Work Needed)
Manual / Auto Tie
Manual
Cylinder Size
6” or Smaller
Motor Horsepower
11-20 HP
Feed Opening Length
40" - 60"
Feed Opening Width
43” – 60”
Ram Face Pressure
43
Used Ramjet Stationary Compactor
$7,000.00
Ready to be bought and put to work!
Condition
Great Condition (Little To No Work Needed)
Wet Trash Compatible
Yes
Used Selco Closed-Door Baler
$29,900.00
Equipment is offered Fully Reconditioned with an 8-10 week lead time. 
Manufacturer
Condition
Refurbished (Up To Spec)
Manual / Auto Tie
Manual
Cylinder Size
8"
Motor Horsepower
11-20 HP
Feed Opening Length
39” and Under
Feed Opening Width
30” and Under
Dealer Internal Equipment ID
3307
Used International Closed Door Baler
$22,500.00
This equipment is offered As-Is. Reconditioned and Repaired options are available upon request, please call for pricing and details.Other Features Include: -Complete bale alarm- Rotating Safety B...
Condition
Good (Running, Needs Minimal Repairs)
Manual / Auto Tie
Manual
Cylinder Size
8"
Motor Horsepower
21-30 HP
Feed Opening Length
40" - 60"
Feed Opening Width
43” – 60”
Dealer Internal Equipment ID
3322
Used Kernic 72 Auto Closed Door Baler
$3,500.00
EQUIPMENT IS OFFERED AS IS/ WHERE IS, THIS IS A KERNIC / MAREN AUTOMATICALLY CYCLED CLOSED DOOR BALER
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Manual
Cylinder Size
6” or Smaller
Motor Horsepower
11-20 HP
Feed Opening Length
39” and Under
Feed Opening Width
30” and Under
Dealer Internal Equipment ID
3314
MO
11862 Missouri Bottom Road
Hazelwood,
MO
63042
United States
View on Map
Used Balemaster 360A Closed-Door Baler
$12,000.00
EQUIPMENT IS OFFERED AS IS, CAME OUT OF SERVICE RUNNING.
Manufacturer
Condition
Fair Condition (Running, Needs Repaired)
Manual / Auto Tie
Manual
Cylinder Size
6” or Smaller
Motor Horsepower
11-20 HP
Feed Opening Length
39” and Under
Feed Opening Width
30” and Under
Dealer Internal Equipment ID
3313
Used Portable Maren Horizontal Closed Door Baler
$2,800.00
Used Portable Maren Model30 multi-application baler can be used for: leather products, texteiles, platics, boxes, tin skeletons, tin cans, aluminum, nylon, and syntheticsFeatures include: Small footpr...
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Manual
Cylinder Size
6” or Smaller
Motor Horsepower
10 HP or Under
Feed Opening Length
40" - 60"
Feed Opening Width
30” and Under
Dealer Internal Equipment ID
3311
MO
11862 Missouri Bottom Road
Hazelwood,
MO
63042
United States
View on Map
Used C & M 6046 Single Ram Auto Tie Baler
$55,000.00
This Used C&M Auto Tie baler is being offered As-Is, this may be offered fully reconditioned - please call for pricing and lead times.
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Auto
Cylinder Size
10"
Motor Horsepower
31-50 HP
Feed Opening Length
40" - 60"
Feed Opening Width
43” – 60”
Dealer Internal Equipment ID
3317
Used Cram-a-lot 10 HP Vertical Baler
$4,500.00
purchased new in 1997.  low number of hours. we used it to tie up rag bales in 1000 pound bales. used it for one store for 7 years then i sold the business. the new owner did not use the baler. i re a...
Manufacturer
Condition
Excellent Condition (Like New, Never Refurbished)
Manual / Auto Tie
Manual
Cylinder Size
10"
Motor Horsepower
10 HP or Under
Feed Opening Length
40" - 60"
Feed Opening Width
43” – 60”
Single or Dual Cylinders (Bore Sizes)
i dont know
Nexgen Widemouth Closed Door Baler
$26,000.00
2007 Nexgen/Marathon closed door baler. Widemouth. 72" x 48" feed opening. 8" cylinder. 30 HP .  Baler is in operation now, making 1500 lb cardboard bales. Plant is shutting down.  Needs min...
Condition
Great Condition (Little To No Work Needed)
Manual / Auto Tie
Manual
Cylinder Size
8"
Motor Horsepower
21-30 HP
Feed Opening Length
61” – 72”
Feed Opening Width
43” – 60”
Single or Dual Cylinders (Bore Sizes)
8" main compression
VA
611 Moorefield ParkDrive
Suite B,
Richmond,
VA
23236
United States
View on Map
Used Marathon Gemini 3560 Closed Door Manual Tie Baler
$25,000.00
This Marathon Nexgen Gemini 3650 Closed-Door Baler comes with an 14' x 48" cleated rubber belt infeed conveyor and hopper extension. A cart tipper is also available, sold separately.
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Manual
Cylinder Size
6” or Smaller
Motor Horsepower
11-20 HP
Feed Opening Length
40" - 60"
Feed Opening Width
31” – 42”
Dealer Internal Equipment ID
20291
Used Harris HRB-918 Two Ram Baler
$55,000.00
Harris HRB-918 Available NowSerial Number: 2545Hopper Opening 74" x 109"Bale Size 47" x 31" x 84"Horse Power 100Main Cylinder 12"Eject Cylinder 8"Tons of Force 181Location: Kansas City, KS Buye...
Manufacturer
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Auto
Cylinder Size
12"
Motor Horsepower
76-150 HP
Feed Opening Length
85” and Above
Feed Opening Width
43” – 60”
Dealer Internal Equipment ID
B00110
Used Selco HLO 8110 Horizontal Auto-Tie Baler
$42,500.00
Used Harris Selco Auto-TieTwin 75HP Motors10" Main Cylinder42" x 42" x Variable Bale SizeAs-is, Where-is
Manufacturer
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Auto
Cylinder Size
10"
Motor Horsepower
76-150 HP
Dealer Internal Equipment ID
20261
Single or Dual Cylinders (Bore Sizes)
10" Main Cylinder, 10" Bale Tension Cylinder
Ram Face Pressure
137
Rebuilt Vertical PTR Cardboard Baler
$5,850.00
This is a rebuilt 60in baler with 10 hp 3 phase motor and 6in hydraulic cylinder. Bale size 60in x 30in x 48in High bale 
Condition
Great Condition (Little To No Work Needed)
Manual / Auto Tie
Manual
Cylinder Size
6” or Smaller
Motor Horsepower
10 HP or Under
Feed Opening Length
39” and Under
Feed Opening Width
43” – 60”
Dealer Internal Equipment ID
RB417-01
Used Gemini 3560 Closed Door Full Eject Horizontal Balers
$22,500.00
Two Marathon Gemini 3560 Closed Door Full Eject Balers available now!Small footprint baler with a hydraulic door latch for moderate-duty multi-purpose applications.Specifications:*Bale Size: 30" H x 4...
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Manual
Cylinder Size
6” or Smaller
Motor Horsepower
11-20 HP
Feed Opening Length
40" - 60"
Feed Opening Width
31” – 42”
Dealer Internal Equipment ID
B00108
Used Bollegraaf HBC 110 Auto-Tie Horizontal Baler
$75,000.00
Available now!Specifications*Hopper size: 5'3" x 3'7"Feeding conveyor width max.: 5'3"Pre-press flap pressure: 55 tonfHydraulic motor: 100 HPPressure force: 105 tonfCapaci...
Manufacturer
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Auto
Motor Horsepower
76-150 HP
Feed Opening Length
61” – 72”
Feed Opening Width
43” – 60”
Dealer Internal Equipment ID
20276
Motor Horsepower
100
Used Vertical Downstroke Balers
$6,000.00
Cardboard balers, vertical balers, downstrokes, prices from $6,000 depending upon make, model, and condition.Multiple makes and models available for sale; current inventory could include Selco, Marath...
Manufacturer
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Manual
Cylinder Size
6” or Smaller
Motor Horsepower
10 HP or Under
Dealer Internal Equipment ID
Vertical
Single or Dual Cylinders (Bore Sizes)
6"
Motor Horsepower
10
Used Harris HRB-10A-S Two Ram Baler
$65,000.00
Any listed operating specs are per manufacturer's documentation for a new baler and are for informational purposes only. Current operating condition should be verified by buyer before purchase. E...
Manufacturer
Condition
As Is (Contact Dealer)
Cylinder Size
14" or Larger
Motor Horsepower
151-300 HP
Dealer Internal Equipment ID
20242
Single or Dual Cylinders (Bore Sizes)
16" Main Ram
Max Pressure
3000
Used Marathon TR1075 Two Ram Baler
$55,000.00
Date of Manufacture 1995480 / 3 Phase PowerBale Weights up to 1400 lbsAny listed operating specs are per manufacturer's documentation for a new baler and are for informational purposes only. Current o...
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Auto
Cylinder Size
10"
Motor Horsepower
51-75 HP
Dealer Internal Equipment ID
20211
Single or Dual Cylinders (Bore Sizes)
10" Main Cylinder
Max Pressure
3000
Used Presmeccanica Mercury 500 Scrap Metal Baler With Lid
$109,500.00
High force scrap metal Baler with Lid.  2003 model, sat for 8 years.  power unit and control housed in building.  in great condition.  See attached spec sheet for details.
Manufacturer
Condition
Great Condition (Little To No Work Needed)
Manual / Auto Tie
Auto
Cylinder Size
13"
Motor Horsepower
76-150 HP
Feed Opening Length
85” and Above
Feed Opening Width
61” and Above
Single or Dual Cylinders (Bore Sizes)
dual 13" compression cylinders
Used Selco HLO-1210-AR75 Auto-Tie Horizontal Baler
$25,000.00
Any listed operating specs are per manufacturer's documentation for a new baler and are for informational purposes only. Current operating condition should be verified by buyer before purchase. Equipm...
Manufacturer
Condition
As Is (Contact Dealer)
Cylinder Size
10"
Motor Horsepower
51-75 HP
Feed Opening Length
40" - 60"
Feed Opening Width
31” – 42”
Dealer Internal Equipment ID
20138
Single or Dual Cylinders (Bore Sizes)
10
Used Selco HRB-616 Narrow Box Two Ram Horizontal Baler
$65,000.00
$65,000 available now as-is. Rebuild available, contact Himes Service Company for more information.Any listed operating specs are per manufacturer's documentation for a new baler and are for informati...
Manufacturer
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Auto
Cylinder Size
12"
Motor Horsepower
76-150 HP
Feed Opening Length
73” – 84”
Feed Opening Width
31” – 42”
Dealer Internal Equipment ID
20144
Used Marathon WS 5042-830 Open End Auto-Tie Horizontal Baler
$94,000.00
Complete Refurb Open End, Auto-Tie Baler with above grade side feed conveyorGreat for OCC baling, low to medium processing volume48" L x 40" Wide Clear top opening, includes conveyor, hopper extension...
Condition
Refurbished (Up To Spec)
Manual / Auto Tie
Auto
Cylinder Size
8"
Motor Horsepower
21-30 HP
Feed Opening Length
40" - 60"
Feed Opening Width
31” – 42”
Single or Dual Cylinders (Bore Sizes)
8"
Used Logemann 245AT1 Auto Tie Two-Ram Baler
$53,900.00
This Logemann 245AT1 two-ram baler is listed in AS-IS condition and available immediately.  We also offer this baler in Repair-Running condition and Fully Reconditioned (call for pricing and...
Manufacturer
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Auto
Cylinder Size
9"
Motor Horsepower
31-50 HP
Feed Opening Length
61” – 72”
Feed Opening Width
61” and Above
Dealer Internal Equipment ID
3218
Used Harris HRB Two-Ram Horizontal Auto Tie Baler
$131,150.00
This Harris HRB-516N is listed As-Is and available immediately.  This baler can also be Repaired/Running or Fully Reconditioned, please call for pricing and lead time.  Conveyor(s) ava...
Manufacturer
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Auto
Cylinder Size
12"
Motor Horsepower
76-150 HP
Feed Opening Length
40" - 60"
Feed Opening Width
31” – 42”
Dealer Internal Equipment ID
3167
Used Marathon Gemini Xtreme Closed Door Manual Tie Horizontal Baler
$24,000.00
Marathon’s Gemini Series Horizontal Balers are moderate-duty, closed-end horizontal balers that enable you to process a variety of materials such as PET, aluminum or steel cans, paper, plastics, OCC,...
Condition
Good (Running, Needs Minimal Repairs)
Manual / Auto Tie
Manual
Cylinder Size
6” or Smaller
Motor Horsepower
11-20 HP
Feed Opening Length
61” – 72”
Feed Opening Width
61” and Above
Single or Dual Cylinders (Bore Sizes)
Dual
Used 2005 Harris HLO-608AR40 Single Ram Auto-Tie Horizontal Baler
$85,000.00
Date of Manufacture: 200550HP Motor, 3PH/460V60" x 45" Charge Box OpeningSide Feed HopperBale Size: 48" wide x 40" high x 72" long Ram Face Pressure: 80 psiOverall Platen Force: 150,000...
Manufacturer
Condition
Great Condition (Little To No Work Needed)
Manual / Auto Tie
Auto
Cylinder Size
8"
Motor Horsepower
31-50 HP
Feed Opening Length
40" - 60"
Feed Opening Width
43” – 60”
Single or Dual Cylinders (Bore Sizes)
Single 8" Bore
Used 2011 Balemaster 4850G-10 Single Ram Auto-Tie Baler
$85,000.00
Model # EO-720Date of Manufacture: 201150HP Motor, 3PH/460V60" x 41.5" Charge Box OpeningBale Size: 44" wide x 29" high x 72" longRam Face Pressure: 149 psiOverall Platen Force: 196,400...
Manufacturer
Condition
Great Condition (Little To No Work Needed)
Manual / Auto Tie
Auto
Cylinder Size
10"
Motor Horsepower
31-50 HP
Feed Opening Length
40" - 60"
Feed Opening Width
31” – 42”
Single or Dual Cylinders (Bore Sizes)
Single 10" Cylinder
Used IPS AT-965-HS-100S Single Ram Open End Auto Tie Hinge Side Multi Material Baler
$97,500.00
This baler is a high speed Auto Tie with a Hinge Side ( large feed hopper for large material 66" x 60"), is a multi material baler ; high grade 25 tph, OCC 15 tph , aluminum Cans 7 tph, HDPE  4.7...
Manufacturer
Condition
Great Condition (Little To No Work Needed)
Manual / Auto Tie
Auto
Cylinder Size
9"
Motor Horsepower
76-150 HP
Feed Opening Length
40" - 60"
Feed Opening Width
61” and Above
Dealer Internal Equipment ID
W2S1001
Used International 4430-50 Single Ram Open End Auto-Tie Horizontal Baler
$47,000.00
This International 4430-50 Auto-Tie is listed AS-IS and available immediately.  We also offer this baler in Repaired-Running condition and Fully Reconditioned (call for pricing and lead time)...
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Auto
Cylinder Size
8"
Motor Horsepower
31-50 HP
Feed Opening Length
40" - 60"
Feed Opening Width
31” – 42”
Dealer Internal Equipment ID
3278
Used Selco HLO Single Ram Open End Auto-Tie Horizontal Baler
$57,000.00
This Selco HLO-608AR-50 is listed AS-IS and available immediately.  We also offer this baler in Repaired-Running condition and Fully Reconditioned (call for pricing and lead time).  Conveyor...
Manufacturer
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Auto
Cylinder Size
8"
Motor Horsepower
31-50 HP
Feed Opening Length
40" - 60"
Feed Opening Width
43” – 60”
Dealer Internal Equipment ID
3283
Used Marathon TR-10-75 Two Ram Auto Tie Horizontal Baler
$75,750.00
This Marathon TR-10-75 is listed in AS-IS condition and available immediately.  We also offer this baler in Repair-Running condition and Fully Reconditioned (call for pricing and lead time). ...
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Auto
Cylinder Size
10"
Motor Horsepower
51-75 HP
Feed Opening Length
61” – 72”
Feed Opening Width
31” – 42”
Dealer Internal Equipment ID
3288
Reconditioned IPS TR-1288-100S Two Ram Auto Tie Horizontal Baler
$280,000.00
This TR-1288-100S has been fully reconditioned and is available immediately.  Conveyor available upon request.Additional Features:Bale Relief DoorPhoto EyePre-Compression LidBy Request: Feed Conv...
Manufacturer
Condition
Refurbished (Up To Spec)
Manual / Auto Tie
Auto
Cylinder Size
12"
Motor Horsepower
76-150 HP
Feed Opening Length
85” and Above
Feed Opening Width
43” – 60”
Dealer Internal Equipment ID
3190
Reconditioned Harris Gorilla 200T-12/9-CD Two Ram Auto Tie Baler & Infeed Conveyor
$345,000.00
2007 Harris Gorilla 12/9 200TIn Use for 13 months - Completely Reconditioned in 201712" Main CylinderTwo 100 HP Motors    Includes new Pro Terra Conveyor    72" Wide - 9"...
Manufacturer
Condition
Excellent Condition (Like New, Never Refurbished)
Manual / Auto Tie
Auto
Cylinder Size
9"
Motor Horsepower
76-150 HP
Feed Opening Length
85” and Above
Feed Opening Width
43” – 60”
Ram Face Pressure
203
Used American Baler 6042HAT960F Single Ram Open End Auto Tie Baler
$69,500.00
American Auto Tie Baler60 HP Motor9"  Cylinder / 76" Stroke59 1/2" x 40 1/2" Hopper Opening42" x 42" x Variable Bale Size12.1 Second Cycle Time (no load)
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Auto
Cylinder Size
9"
Motor Horsepower
51-75 HP
Feed Opening Length
40" - 60"
Feed Opening Width
43” – 60”
Dealer Internal Equipment ID
148847
Harris HRB-8NF Reconditioned Two Ram With New Operator Station And Laser Cylinder Travel
$180,000.00
Reconditioned Harris HRB-8NF two ram with new touch screen operator station, new floor/walls, new knives, new hold downs, pumps, lasers, paint to your colorAvailable Early December 2019
Manufacturer
Condition
Great Condition (Little To No Work Needed)
Manual / Auto Tie
Auto
Cylinder Size
12"
Motor Horsepower
76-150 HP
Feed Opening Length
85” and Above
Feed Opening Width
61” and Above
Dealer Internal Equipment ID
LP-1
Used (Refurbished) Harris HAL-60-NFFEFP Closed Door Manual Tie Horizontal Baler
$79,500.00
Bale Size: 45"W x 30"H x 60"L Bale Weight: Up to 1,300 lbs (O.C.C.)Cycle Time: 15 seconds (no load)75 HP, 460 Volt, 3 Phase10" Main Cylinder / 138" Stroke25 HP Charge Pump
Manufacturer
Condition
Refurbished (Up To Spec)
Manual / Auto Tie
Manual
Cylinder Size
10"
Motor Horsepower
51-75 HP
Feed Opening Length
40" - 60"
Feed Opening Width
30” and Under
Dealer Internal Equipment ID
148221
Used Marathon Stealth 60" Closed Door Baler (As Is)
$16,000.00
Marathon Stealth baler, used as is. In very good condition and available now! 46-inch wide by 60-inch long feed opening “Hand feed” type hopper standard Hydraulic bale door release 1 to 2 tons...
Condition
Good (Running, Needs Minimal Repairs)
Manual / Auto Tie
Manual
Cylinder Size
6” or Smaller
Motor Horsepower
11-20 HP
Feed Opening Length
40" - 60"
Feed Opening Width
43” – 60”
Dealer Internal Equipment ID
Stealth Danville
Used Selco 2R975 Two Ram Auto Tie Horizontal Baler (Sold As Is)
$55,000.00
Very good condition Selco two ram sold as is. Parts and support through Harris.
Manufacturer
Condition
Good (Running, Needs Minimal Repairs)
Manual / Auto Tie
Auto
Cylinder Size
10"
Motor Horsepower
51-75 HP
Dealer Internal Equipment ID
Selco
PM Cycle
Quarterly
Used Harris / Selco 516N Two Ram Auto Tie Horizontal Baler
$54,000.00
Harris / Selco 516N two ram baler sold as is. Two 75 HP motors and 12" main cylinder. Put her to work!
Manufacturer
Condition
Fair Condition (Running, Needs Repaired)
Manual / Auto Tie
Auto
Cylinder Size
12"
Motor Horsepower
76-150 HP
Feed Opening Length
40" - 60"
Feed Opening Width
31” – 42”
Dealer Internal Equipment ID
516N
Used Harris HCB 5443 Single Ram Auto Tie Baler
$10,000.00
$10,000 as-is or $65,000 reconditioned with replaced PLC and displayAutomatic Horizontal Open End Baler Very narrow and compact footprint High strength design & construction Fast cy...
Manufacturer
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Auto
Dealer Internal Equipment ID
20024
Used Harris (Selco) HRB 511 Two Ram Baler Auto Tie Baler
$42,000.00
Pinnacle 470 Wire TierOperating specs are per manufacturer's documentation for a new baler and are for informational purposes only. Current operating condition should be verified by buyer before purch...
Manufacturer
Condition
As Is (Contact Dealer)
Brochure
Manual / Auto Tie
Auto
Cylinder Size
10"
Motor Horsepower
51-75 HP
Feed Opening Length
61” – 72”
Feed Opening Width
43” – 60”
Used Maren Single Ram Manual Tie Open End Auto-Tie Horizontal Baler
$40,000.00
 MAREN 72/48-301-OE AUTOMATIC BALER 40” DEEPNO SHEAROVERALL DIMENSIONSLENGTH301-1/2”WIDTH66”HEIGHT96-3/4”FEEDER-HOPPERLENGTH48”WIDTH (ACTUAL 38-7/8))42”DEPTH40”BALING CHAMBERLENGTH130”WIDTH42”DEP...
Condition
Great Condition (Little To No Work Needed)
Manual / Auto Tie
Manual
Cylinder Size
7"
Motor Horsepower
21-30 HP
Feed Opening Length
40" - 60"
Feed Opening Width
31” – 42”
Ram Face Pressure
2,600
Reconditioned (Used) Max Pak HOE-2850-308AR Single Ram Auto Tie Baler
$46,900.00
Max Pak Auto Tie Baler - 30 HP, 50" x 30" feed, 8" main cylinder. Used for shredded paper only. To be reconditioned and in guaranteed good working order.
Manufacturer
Condition
Great Condition (Little To No Work Needed)
Manual / Auto Tie
Auto
Cylinder Size
8"
Motor Horsepower
21-30 HP
Feed Opening Length
40" - 60"
Feed Opening Width
30” and Under
Dealer Internal Equipment ID
Apex Equipment LLC
Used Selco (Harris) Single Ram Auto Tie Horizontal Baler
Call For Pricing
Please contact us
Manufacturer
Condition
Good (Running, Needs Minimal Repairs)
Manual / Auto Tie
Auto
NH
13 Jessie Doe Rd, , NH
Rollinsford,
NH
03869
United States
View on Map
Used Marathon Closed Door Side Eject Manual Tie Horizontal Baler
Call For Pricing
Please contact us
Condition
Fair Condition (Running, Needs Repaired)
NH
13 Jessie Doe Rd, , NH
Rollinsford,
NH
03869
United States
View on Map
Refurbished PTR 60 Inch 2300 Vertical (Down-Stroke) Baler
Call For Pricing
This units are 100% refurbished
Condition
Refurbished (Up To Spec)
Manual / Auto Tie
Manual
Motor Horsepower
10 HP or Under
NH
13 Jessie Doe Rd, , NH
Rollinsford,
NH
03869
United States
View on Map
Used Economy Used Closed Door Manual Tie Horizontal Baler
Call For Pricing
This baler is currently in our yard and ready to ship "as-is" We will offer refurbishment if requested. 20 HP Motor460V Power
Manufacturer
Condition
Fair Condition (Running, Needs Repaired)
Manual / Auto Tie
Manual
NH
13 Jessie Doe Rd, , NH
Rollinsford,
NH
03869
United States
View on Map
1
2