Balers are a wonderfully efficient bit of
kit, and they generally help to enrich recycling processes in a myriad of
reliable capacitates. Unfortunately, even the very best balers can get jammed
up from time to time, and no baler is a match for a poorly trained or
irresponsible workers.
When you’re working with any type of
machine in any kind of industry, safety should always come first.
Learning how to safely unjam a cardboard baler should be
one of the first skills you learn if you aim to maximize efficiency and stay
out of harm’s way.
If you’re lacking a bit of confidence when
it comes to unjamming the baler, or you just need to brush up on your memory,
don’t worry. Here are some tips that you might find useful.
Push the Red Stop Button
The big red stop button is there for a very
important reason: it cuts off the machine in the event of an emergency.
Knowing how to shut off power to the
machine is possibly the most critical part of the balers safety protocol.
Push this button if your machine is
malfunctioning, and do not attempt to remove the clog until the machine is
completely off.
If the stop button (it might not actually
be red) has failed to cut the power, or you need to kill all power to the
baler, pull the disconnection switch handle at the mains.
Only once the power is completely off
should you consider removing the jam.
Reverse the Ram
If it’s a non-major jam, you could always
think about manually reversing the ram, as this may eject the blockage quickly
and efficiently.
Never Reach Inside During Operation
Whatever you do, do not reach inside the
machine while it is operating. Balers can exert tens of thousands of pounds of
pressure tremendously quickly, and you’ve seen what it does to cardboard.
Keep your awareness levels up when using
the machine, and if it jams, don’t instinctively reach in. This can prove
utterly disastrous.
The machine guarding should be in place to prevent
this from happening, so make sure yours is working to prevent any serious
issues from occurring. Don’t use your baler if this guard is broken.
Follow the Manual
You should not ever go too far wrong if you
manage to stick to the rules. Reading the manual that came with the machine and
familiarizing yourself with all the parts before you start using it is a must.
Many accidents like jams and general
malfunctions are down to loading the machine with excessively large amounts of cardboard boxes. If you
never read the manual, you won’t know how big your load should be in the first
place, so don’t risk it, as repeated strains could irrevocably damage the
mechanism.
While there are indeed a huge variety of
baling machines available, the fundamentals of bales safety stay relatively unchanged.
Call the Manufacturers
If you cannot seem to unjam your jam,
contact the manufacturer of the machine, as they should be able to point you in
the right direction.
If your baler keeps jamming, even when you
follow the instructions to the letter, then it’s probably time for an upgrade. Recycling Balers can help you with
this, so why not check out our online superb online marketplace and start
looking for solutions today?