Filters

Is Equipment Sold
Yes

Used Sold Recycling Equipment

(Showing 16 Equipment)

Sort By

2019 Newer BACE Stockroom Baler
$2,500.00
Almost new condition220 single phase !Outside of hinge grinded off to obtain higher door swing radius36 x 24 x 30 inch baleTaken out of service because of upgrade to larger baler.Customer owned
Condition
Great Condition (Little To No Work Needed)
Manual / Auto Tie
Manual
Cylinder Size
6” or Smaller
Motor Horsepower
10 HP or Under
Feed Opening Length
39” and Under
Feed Opening Width
31” – 42”
Used Marathon CE 503042 Closed Door Horizontal Baler
$38,500.00
Refurbished Closed Door Baler.  Cylinder repacked, floor condition good, ram shear replaced, body shear sharpened.  new oil, all hydraulics and electrical tested.  Repaint and re decal.
Condition
Refurbished (Up To Spec)
Manual / Auto Tie
Manual
Cylinder Size
6” or Smaller
Motor Horsepower
11-20 HP
Feed Opening Length
40" - 60"
Feed Opening Width
30” and Under
Motor Horsepower
20
Used International / Consolidated Textile Vertical Baler
$5,000.00
In very good conditionOperational to as new specsNew safety stickers and disconnectExtra door switch added to rear doorMakes a 100 lbs textile baleClam sheel type doors, i.e. both front and rear doors...
Condition
Great Condition (Little To No Work Needed)
Manual / Auto Tie
Manual
Cylinder Size
6” or Smaller
Motor Horsepower
10 HP or Under
Feed Opening Length
39” and Under
Feed Opening Width
30” and Under
Dealer Internal Equipment ID
3106-025
Used 2010 PTR 2300 HD 60 Inch Vertical Baler
$5,800.00
Refurbished 2010 PTR 2300 HD- Wire guides for front tie off- Refurbished, but not painted- Love joy motor, pump coupling - new spider coupling insert- New wear pads- Oil changed - New gate mesh-...
Condition
Refurbished (Up To Spec)
Manual / Auto Tie
Manual
Cylinder Size
6” or Smaller
Motor Horsepower
10 HP or Under
Feed Opening Length
39” and Under
Feed Opening Width
43” – 60”
Dealer Internal Equipment ID
095983-8207
Used Harmony Automatic Tensixty Vertical Baler & Conveyor
$28,000.00
Harmony/GPI Model T60XHRC- Baler/conveyor systemIdeal For: Recycling Centers, Transfer Stations, Super Markets, Hotels/Motels, Department Stores, Manufacturing Facilities, Colleges or Universitie...
Manufacturer
Condition
Good (Running, Needs Minimal Repairs)
Manual / Auto Tie
Manual
Cylinder Size
10"
Motor Horsepower
11-20 HP
Feed Opening Length
40" - 60"
Feed Opening Width
30” and Under
Ram Face Pressure
150
Used Excel Manufacturing EX 62 Full Eject Closed End Manual Tie Horizontal Baler
$17,500.00
Excel Model EX 62serial # x 2347height 62" loading 52 1/2" frame length 179" width77" chamber 47" L x 60" W x 30" H weight 14,000 lbsarea to operate 10"x 20"
Manufacturer
Condition
Great Condition (Little To No Work Needed)
Manual / Auto Tie
Manual
Cylinder Size
6” or Smaller
Motor Horsepower
11-20 HP
Feed Opening Length
39” and Under
Feed Opening Width
43” – 60”
Ram Face Pressure
3000
Used Logemann Brothers 345 T Two Ram Auto Tie Baler
$15,000.00
Handyman special - get this powerfully-built two-ram baler for $15,000 as-is without wire tier. Available now in Texas.Ask us about reconditioning service specials with the purchase of a baler.Operati...
Manufacturer
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Auto
Cylinder Size
12"
Feed Opening Length
85” and Above
Feed Opening Width
43” – 60”
Dealer Internal Equipment ID
20113
Single or Dual Cylinders (Bore Sizes)
12
Used Harris Badger L100 S-2-10/7
$55,000.00
Operating specs are per manufacturer's documentation for a new baler and are for informational purposes only. Current operating condition should be verified by buyer before purchase. Equipment so...
Manufacturer
Condition
As Is (Contact Dealer)
Spec Sheet
Manual / Auto Tie
Auto
Cylinder Size
10"
Motor Horsepower
76-150 HP
Feed Opening Length
85” and Above
Feed Opening Width
31” – 42”
Used American Baler 4016-50 Narrow Box 2-Ram Auto-Tie Horizontal Baler
$30,000.00
This baler will be removed from the facility in mid-December 2019 or early January 2020. Model 4016-50 (year 2007) has been used for baling cardboard, plastics, news, and cans. Baler is being replac...
Condition
Fair Condition (Running, Needs Repaired)
Cylinder Size
9"
Motor Horsepower
31-50 HP
Feed Opening Length
61” – 72”
Feed Opening Width
43” – 60”
Dealer Internal Equipment ID
ABC4016
Ram Face Pressure
158
VA
611 Moorefield ParkDrive
Suite B,
Richmond,
VA
23236
United States
View on Map
Used BACE V63XHD Deep Penetration Vertical Baler
$11,500.00
7" cylinder and long stroke makes this baler great for hard to bale materials. Works well for cardboard, paper, plastic, and light metals. Machine was used very lightly and was in storage for a whil...
Condition
Great Condition (Little To No Work Needed)
Manual / Auto Tie
Manual
Cylinder Size
7"
Motor Horsepower
11-20 HP
Feed Opening Length
40" - 60"
Feed Opening Width
30” and Under
Ram Face Pressure
51
Used Cramalot 72" Wide Vertical Baler
$2,500.00
This is an older model Cramalot 72" vertical baler. 6" cylinder. 10 HP motor. Baler is in fair condition and fully operational. This is an ideal baler for baler all sizes of cardboard boxes--full s...
Manufacturer
Condition
Fair Condition (Running, Needs Repaired)
Manual / Auto Tie
Manual
Cylinder Size
6” or Smaller
Motor Horsepower
10 HP or Under
Feed Opening Length
61” – 72”
Feed Opening Width
61” and Above
Dealer Internal Equipment ID
Cram72
VA
611 Moorefield ParkDrive
Suite B,
Richmond,
VA
23236
United States
View on Map
Used Sierra (Macpresse) Single Ram Open End Horizontal Auto Tie Baler
$95,000.00
This baler is manufactured by Macpresse and distributed in the United States by Sierra Manufacturing. Manufacture date: 2010Hours: 33090Includes extra main cylinder!This baler is designed to bale the...
Manufacturer
Condition
As Is (Contact Dealer)
Manual / Auto Tie
Auto
Cylinder Size
10"
Motor Horsepower
151-300 HP
Feed Opening Length
73” – 84”
Feed Opening Width
31” – 42”
Dealer Internal Equipment ID
20225
Used Selco V-5HD Vertical Down Stroke Baler
$5,500.00
Cardboard Vertical Baler For Sale in Waco Texas area. This unit is refurbished and ready to installBale Size: 60"LR x 30"FB x 48"HApprox: Bale Weights: 900-1,000 lbsOil Capacity: 18 GallonsHydraulic P...
Manufacturer
Condition
Fair Condition (Running, Needs Repaired)
Manual / Auto Tie
Manual
Cylinder Size
6” or Smaller
Motor Horsepower
10 HP or Under
Paint Color Options
See Images
Used Nexgen Closed Door Manual Tie Horizontal Baler
$37,500.00
This used Closed Door Manual Tie Horizontal Baler has the following specs Complete Re-Line - Replaced the entire floor 30 HP MotorSerial Number: 2196000Dealer Asset Number: 20238Bale Size 48" x 60" x...
Condition
As Is (Contact Dealer)
Spec Sheet
Manual / Auto Tie
Manual
Cylinder Size
9"
Motor Horsepower
21-30 HP
Feed Opening Length
40" - 60"
Feed Opening Width
43” – 60”
Used Harris Centurion 200 HP Two Ram Auto-Tie Horizontal Baler
$200,000.00
This Harris baler can be sold as is or re-conditioned / refurbished by our team. The current unit is fully inspected prior to refurbishment and will be tested upon completion. We are willing to sell t...
Manufacturer
Condition
As Is (Contact Dealer)
Spec Sheet
Manual / Auto Tie
Auto
Cylinder Size
13"
Motor Horsepower
151-300 HP
Feed Opening Length
85” and Above
Feed Opening Width
61” and Above
Used American Baler PAC5029-850 Single Ram Auto-Tie Baler
$35,000.00
American Baler PAC5029-850 Single Ram Auto-Tie Baler is currently for sale "as is" (nothing will be done) $30,000.00 FOB. PBE will load this on truck. Baler was previously located at a printer baling...
Condition
Good (Running, Needs Minimal Repairs)
Manual / Auto Tie
Auto
Cylinder Size
8"
Motor Horsepower
31-50 HP
Feed Opening Length
39” and Under
Feed Opening Width
43” – 60”
Ram Face Pressure
108,000
VA
611 Moorefield ParkDrive
Suite B,
Richmond,
VA
23236
United States
View on Map